How to handle Electric shocks effectively at your workplace?

How to handle Electric shocks effectively at your workplace?

Electrical Shocks injuries can happen in any industry and can range from minor to major serious injuries that require hospitalization. In many cases, Electrocution injuries are preventable and can be avoided through proper safety measures and training. If you have to understand How do Electrical Shocks Occur you also need to know How to handle Electric shocks effectively at your workplace?

Electric shock while working ( Image- Amio Energy )

How do Electrical Shocks Occur?

Electric shock occurs whenever the human body comes in contact with a source of voltage. Even if there is no direct contact with the source of electricity, a shock can occur if the current travels through the air and comes in contact with the hair or skin. The intensity of the shock will depend on the voltage of the current present. High-voltage shocks can cause burns, muscle spasms, cardiac arrest, and death.

How to handle Electric shocks effectively at your workplace?

Handling electric shocks effectively in the workplace requires taking a number of safety precautions and knowing what to do in the event of an emergency.

Here are some steps you can take to reduce the risk of electric shock and effectively handle electric shocks in the workplace – :

  1. Know the hazards:

Understanding the potential sources of electric shock in your workplace is crucial for avoiding them. This can include frayed electrical cords, damaged electrical outlets, or exposure to the water near electrical equipment.

  1. Use safety equipment:

Always wear protective equipment, such as rubber gloves and safety shoes, when working with electrical equipment. Make sure that electrical equipment is properly maintained and that damaged equipment is repaired or replaced immediately.

  1. Train employees:

Provide training to all employees on the dangers of electrical shock and the proper procedures for handling electrical equipment.

  1. Turn off the power:

If someone has received an electric shock, turn off the power to the electrical equipment if it is safe to do so. If it is not safe, or if you are not sure how to turn off the power, evacuate the area and call for help.

  1. Provide first aid:

If someone has received an electric shock, immediately call for medical and begin providing first aid. If the person is not breathing and has no pulse, then start CPR immediately. Use an AED if it is present or when you call for an ambulance ask them to get AED. If the person is breathing and has a heartbeat, lay them down and loosen any tight clothing.

  1. Report incidents:

Report any electrical shock incidents to the proper authorities and your supervisor. This will help ensure that the cause of the incident is identified and corrected, and that appropriate measures are taken to prevent similar incidents from happening in the future.

By taking these steps, you can help reduce the risk of electrical shock in your workplace and be prepared to handle electrical shocks effectively in the event of an emergency.

A person injured by electrical contact should be seen by a healthcare provider

Call +91 9343-18-0000 or your local emergency number if the injured person experiences:


  • Do not touch an injured person exposed to electric current.
  • Call +91 9343-18-0000 or your local emergency number if the source of the burn is a high-voltage wire or electricity.
  • It is highly recommended not to approach high-voltage wires until the power is off
  • Stay at least 20 feet (about 6 meters) away if wires are jumping and sparking.
  • You should never move a person with an electrical injury except when there is immediate danger.

Get your workplace emergency prepared with CPR Training and AED procurement with the help of VMEDO. Write to us at or call us at +91 6364904226 for enquiries

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *